2200H Field Programmable VHF Mobile Radio
The ICOM 2200H has been replaced by the
- DTMF Keypad Microphone
- DC Power Cable
- Mounting Bracket
- Mic Hanger
- Necessary Hardware
|Note: You will
antenna that's made for the frequency that you need to transmit on. Also,
antenna mount cable will need to be terminated with a PL-259 (UHF Male)
type connector for this Radio.
military grade construction. Meets or Exceeds latest military standards to guard
against shock, vibration and moisture
Stable 65 Watts output and new digital features
65 Watts of output power
A MOS-FET power ampliﬁer provides 65 Watts of stable output power. A one piece,
aluminum chassis helps to keep the transceiver cool and provides durable long-lasting
Optional digital unit, UT-118
The optional UT-118 provides digitally modulated and demodulated clear voice
and data communication at 4.8kbps. Store up to 6 of your own callsigns, and up to
6 more from other stations. Or instead of recording a callsign, record any message
of up to 20 characters. You may then make a call by sending one of your callsigns
or a recorded CQ message. The digital callsign squelch allows you to choose an incoming
call selected by the callsign. When connected to an external GPS receiver*,
position information may be exchanged with other stations.
* NMEA 0183 output and RS-232C interface are required.
The IC-2200H retains a familiar user interface to the IC-2100H. The large tuning
dial provides easy access to active channels even without looking at the front panel.
Secondary functions are easily recalled by holding the appropriate button.
Dynamic Memory Scan (DMS)
With a total of 207 alphanumeric memory channels, Icom’s exclusive DMS system
allows you to scan selected memory banks by simply adding and deleting bank links.
CTCSS and DTCS operation standard
The IC-2200H contains 50 CTCSS (PL) and 104×2 DTCS (Digital) encode/decode plus
tone scan functions. The “pocket beep” feature gives you an audible and visual indicator
of an incoming call.
DTMF autodial memories
- DTMFcode squelch and pager function with optional DTMF decoder, UT-108
- Weather channel with weather alert function
- FM narrow mode switchable
- Selectable squelch delay
- Built-in 10dB squelch attenuator
|Frequency range (Unit: MHz)
||: FM, AM(Rx only)
|Number of memory ch.
||: 207 (incl., 6 scan edges, 1 call Ch.)
||: SO-239 (50 ohm)
||: ±10 ppm –10°C to +60°C
(projections not included)
|: 140(W) × 40(H) × 146(D) mm;
5 1/2(W) × 1 9/16(H) × 7 3/4(D)
||: 65, 25, 10, 5 Watt selectable
||: Double-conversion super heterodyne system
|Receive Sensitivity (at 12dB SINAD)
||: 0.133µV typical
||: More than 6/3 kHz at -6dB
Less than 14/9 kHz at -60 dB
|Ext SP connector
||: 3-connector 3.5 (d) mm (1/8")