M802 SSB High Frequency Marine Radio Transceiver
The following accessories are supplied with IC-M802:
External speaker (SP-24)
Mounting bracket kit for main unit
Mounting bracket kit for remote controller (MB-81)
Mounting bracket kit for speaker (MB-82)
DC power cable (OPC-1107A)
Microphone hanger kit
Cable tie set
Spare fuses (FGB 30 A)
Spare fuses (FGB 5 A)
Remote control cable (OPC-1106)
Tuner connector kit
Accessory connector (8-pin DIN)
The latest ICOM Digital Signal Processor technology with a compact remote head
Standard 4×8 remote controller
The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller.
When set up with the IC-M502 VHF radio, Icom offers you a complete communications
Large LCD with dot matrix characters
You can easily read the alphanumeric name of any of the 1355 ITU channels at
a glance with the large LCD display. Nighttime operation is no problem with 10 levels
(plus OFF) adjustable backlit display and keypad.
Easy to use in all conditions
The IC-M802 offers two large dials – bank and channel – for easy channel selection.
Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels
Built-in digital selective calling
For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency
communications technology. (ITU Class E standard.) The emergency button is covered
by a red, spring loaded hatch to avoid accidental DSC activation.
Digital signal processor advantage
The speech compressor, utilizing DSP, increases average talk power. Flexible
filter settings provide for narrow band signals like e-mail, SITOR, FSK and other
operation without an optional filter.
150W (PEP) of powerful output
150 Watts of power offers superior worldwide communications. A one piece, die
cast aluminum chassis and a large cooling fan allow continuous transmission at full
output power– very important for data communications, like e-mail.
One-touch e-mail access
An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency,
mode and bandwidth settings. At sea e-mail has never been easier.
Automatic antenna tuner, AT-140
An optional automatic antenna tuner, AT-140, easily connects to the IC-M802.
When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays
a warning indicator on the LCD.
- Wide band receive coverage (0.5 – 29.9999MHz)
- Remote control mic allows you to select channels directly
- Accessory RS-232C port allows connection of modem, etc.
- GPS input, NMEA 0183 version 3.01
- A headphone jack in front of the controller