TM-V71A Field Programmable VHF/UHF Dual Band
- DTMF Keypad Microphone
- DC Power Cable
- Mounting Bracket
- Mic Hanger
- Necessary Hardware
|Note: You will need
antenna that's made for the frequency that you need to transmit on. Also,
antenna mount cable will need to be terminated with a PL-259 (UHF Male)
type connector for this Radio.
High RF Power Output (50W)
The TM-V71A provides an impressive 50 watts of RF power (VHF & UHF), with a choice
of High/Mid/Low output.
Dual Receive On Same Band (VxV, UxU)
In addition to simultaneous receive on both VHF and UHF bands, this radio can receive
two frequencies on the very same band. This means, for example, that you can have
both the call channel and local channel, or the repeater channel and local channel,
on the same band.
Compatible With ARRL TravelPlus*
The MCP-2A programming software is compatible with ARRL TravelPlus For Repeaters;
this allows data export to the radio, making trip planning easy.
*TravelPlus is available from the ARRL at www.arrl.org
"Five-In-One" Programmable Memory
For extra versatility, the TM-V71A has a programmable memory that can store five
entire operating profiles, ready for instant recall at the push of a button. Each
profile includes such settings as display mode, frequency range, and memory mode.
It can equally be used to switch between 5 VFO frequencies.
1,000 Multifunction Memory Channels
There are 1,000 split memory channels for storing essential data
— such as transmit and receive frequencies, frequency step, and tone frequency
— plus an additional 10 for programmable scan. You can identify each channel with
up to 6 alphanumeric characters (Memory Name function). Additionally, memory data
can be edited and stored on a PC using the optional PG-5G programming interface
cable and MCP-2A Memory Control software
As well as VFO scan, program scan, MHz scan, memory scan and call scan, the TM-V71A
offers memory bank scan: the 1,000 channels are grouped into 10 banks for selective
scanning. Also featured are scan resume (time-operated, carrier-operated, and seek),
memory channel lockout, tone scan, CTCSS scan, and DCS scan.
Invertible Front Panel
For greater installation convenience, the detachable front panel can be inverted
so the transceiver can be mounted upside down, thus ensuring that the speaker is
Choice Of 2 Backlight Colours
To maximize visibility, the backlight colour for the large LCD panel can be switched
between warm amber and cool green.
104-Code Digital Code Squelch
In addition to CTCSS (42 subtone frequencies), the TM-V71A is equipped for DCS (104
codes). Whatever code is chosen, the squelch will only open for reception if the
other party uses the identical code.
Voice Guidance & Storage Option (VGS-1)
The audible announcement function is enabled for blind-key operation using the optional
VGS-1 unit, which also provides up to 30 seconds of continuous recording.
Weather Alert/RX (US only)
This transceiver is capable of receiving the NOAA Weather Band and responding to
emergency transmissions such as storm warnings by emitting an audible alert tone.
EchoLink® Sysop Mode For Node
When the TM-V71A is connected to a PC (with the necessary Windows-compatible software
installed) using the PG-5H option, it can operate as a node terminal for EchoLink®.
EchoLink® connects radio amateurs through the Internet using VoIP technology: any
transceiver with access to a node can connect to any other in the world as long
as it too has node access. It is also possible to access the EchoLink® network directly
from a PC.
To register for EchoLink® (using your call sign), access the
official website at www.echolink.org.
EchoLink® Memory (Automatic Dialer)
Up to 10 DTMF memory channels dedicated to EchoLink® can store call signs (or conference
names) and Node Numbers. Memory Control is also possible using a PC with the MCP-2A
|118 - 524 MHz
136 - 524 MHz
800 - 1300 MHz *
(*excluding cellular band)
|144 - 148 MHz
430 - 450 MHz
|HI VHF/UHF 50W / 50W
MID VHF/UHF Approx.10W / Approx. 10W
LOW VHF/UHF Approx. 5W / Approx. 5W