Field Programmable VHF/UHF Dual Band Mobile Radio
Choose your FREE item with purchase of FT-7900R
|+ Or Choose a Free Magnet Mount Dual Band Antenna with purchase
A $40 Value Free !!
|Antenna consists of 18 inch
whip with Magnetic mount, 12' cable and Connector for this radio.
Free Antenna offer for a limited time only while supplies last. Subject to
end without notice.
|Note: You will
antenna that's made for the frequency that you need to transmit on.
antenna mount cable will need to be terminated with a PL-259 (UHF
Male) type connector for this Radio.
- DTMF Keypad Microphone
- DC Power Cable
- Mounting Bracket
- Mic Hanger
- Necessary Hardware
- Free Separation Kit or Free Antenna - Your Choice!
One-Touch Hyper Memories
Five front panel keys allow complete transceiver configuration status to be stored
for convenient one-touch recall. So you can set up favorite frequencies in each
operating band, including the receive-only bands, then recall them with a single
touch of a button!
Internet Linking Compatibility
The FT-7900R’s DTMF signaling capabilitv includes provision for easy access
WiRESTM (Wide-coverage Internet Repeater Enhancement System) Internet linking
as well as other
linking systems that require a DTMF string for access.
The time-Out Timer prevents an accidentally “stuck microphone” condition from
causing interference to other users. If the transmitter is keyed beyond the
TOT cutoff time, the transmitter will be disengaged automatically. The TOT feature’s
cutoff interval is adjustable, in one-minute increments, up to a maximum of
Easy-to-Read Liquid Crystal Display
Affording easy viewing from a wide variety of viewing angles, the LCD of the
FT-7900R features Yaesu’s renowned OmniGlowTM display illumination with four
illumination levels available for different operating environments. The front
panel’s keys are also illuminated, for ease of operation at night.
Four keys on the microphone may be custom-programmed by you, so you can
have your favorite operating
quickly available on the microphone.
Keypad Frequency Entry
When using the MH-48A8J DTMF Microphone (supplied in U.S. version), you may
enter VFO frequencies or memory channel numbers directly from the microphone’s
keypad. On transmit, the MH-48A8J serves as a full-featured 16-key DTMF pad,
and the FT-7900R also provides a 16-channel DTMF Autodialer that may be used
for Autopatch or Internet Linking access.
You can scan the band, a portion of the band, the memories, or two channels
on a “priority” basis, so you’ll always be able to keep up with the action!
And with the Yaesu exclusive Smart SearchTM system, you can command the FT-7900R
to sweep the band, searching for busy channels that will automatically be
loaded into a special Smart Search memory bank.
Separation Kit for Remote Mounting (option)
Using the optional
YSK-7800 Separation kit, which contains both cabling and a bracket for
the remote front panel, you can mount the FT-7900R's front panel on the vehicle’s
dash board, then stow the radio’s body under the seat or in some other convenient,
out-of-the-way location. The cables are approximately 20 feet (6 m) in length.
Power-Off (APO) Battery Saver
To prevent depletion of your vehicle’s battery if you forget to turn off your
radio, the FT-7900R includes an Automatic Power-Off (APO) feature, which will
automatically turn the radio off after an operator-defined period of 1 - 12
- 100% Field
Programmable Capability. No Computer or Software necessary to program every
aspect of the FT-7900R
- Front panel’s
[AGO] key may also be custom-programmed
and computer programming capability (optional
ADMS software required) Wide/ Narrow Deviation settings
Repeater Shift (ARS) • RF Squelch feature sets squelch level according to
incoming signal strength
Memory Channels with 20 Memory Groups
The FT-7900R's incredible memory channel capacity includes registers for over
1000 channels, each capable of storing a 6-character Alpha-Numeric label.
2 Priority Channels can be set up. And the memories may be stored in any of
the 20 available memory groups; a particular memory channel may also be stored
in multiple groups, if desired.
• High Power Output
Boasting a big 50 Watts of power output on VHF, and 40 Watts on UHF, (TX 144-148
& 430-450 MHz) or (TX
136-174 & 420-470 MHz with option) the FT-7900R also includes provision
for three lower power levels, so you never have to use more power than you
really need. The power level is stored in regular and Hyper Memory registers,
• Leading-Edge Tone Control Systems
Full-featured CTCSS (50 tones) and DCS (104 codes) Encode/Decode systems are
built into every FT-7900R, to ensure compatibility with modern repeater systems.
And Yaesu’s exclusive ARTSTM Auto-Range Transponder System uses DOS signaling
to confirm when two stations are within communications range—ideal for emergency
1200/9600 bps Packet Jack
The rear panel of the FT-7900R includes an industry-standard Packet Interface
Jack, for plug-and-play compatibility with most TNCs configured for interconnection
to this standard mini-DIN jack.
The FT-7900R provides receiver coverage from 108 to 520 MHz, and 700 to 999.99
MHz (cellular blocked), so you have available a wide range of monitoring excitement,
including AM Aircraft, Public Safety, Government, Business, and, of course,
Amateur communications. The synthesizer steps appropriate for the operating
band are automatically selected, too!
Weather Alert (U.S. Version Only)
A special memory bank on the FT-7900R allows instant recall of the ten NOAA
Weather frequencies. What’s more, you can enable a special “Severe Weather
Alert” feature that will sound an alarm when a NOAA station transmits the
special alert tone during a severe weather alert broadcast.